You have two options - the X2 four fletch or the Fusion 2 three fletch.

Both are excellent choices for fixed broadhead flight.

The four-fletch X2's may be better for draw lengths under 28.5" or for those who are concerned about rest clearance.

The three-fletch Fusion 2's may be better for draw lengths longer than 28.5" or for stabilizing fixed heads over 1 1/4" cutting diameter.

Nockturnal G

Firenock G

DO NOT get hybrid or adaptable lighted nocks.

DO NOT get lighted nocks that require an outsert adapter.

Most components come from high end manufacturers overseas, but every arrow is assembled in good ol' Wisconsin.

If you need replacement components, we sell parts on this website. Don't know which parts you need? Email info@vectorcustomshop.com for advice.

We cut carbon 1" shorter than your draw length. So for a 28" draw, the shaft itself will be 27". The insert and nock will add some length, resulting in ~28" arrow overall.

When inputing your specs it is essential that you enter your DRAW LENGTH as requested - NOT your desired arrow length. They are not the same, and you will end up with poor flight unless you enter inputs as prompted.