You have three options.

The X2 is the best choice for 90% of bowhunters. It is sufficient to stabilize most broadheads on the market while not being so large that you get a parachuting effect from excess drag. When in doubt, choose X2. You won't regret it.

The SL would be a good choice for someone who gives tuning a lot of attention and doesn't shoot a head any larger than 1" cut. It also may be a challenge to tune with draw lengths longer than 28". The significant advantage is that they maintain trajectory slightly better than the X2 due to reduced drag.

The THP vane is The Hunting Public branded Fusion 2 four fletch. This is our highest profile vane and offers more correction at the cost of increased drag. Arrows built with this vane will include THP branded wraps.

Nockturnal G

Firenock G

Anything rated for .165 or .166 ID shafts.

DO NOT get hybrid or adaptable lighted nocks.

DO NOT get lighted nocks that require an outsert adapter.

Most components come from high end manufacturers overseas, but every arrow is assembled in good ol' Wisconsin.

If you need replacement components, we sell parts on this website. Don't know which parts you need? Email info@vectorcustomshop.com for advice.

We cut carbon to the same length as your draw length. So for a 28" draw, the shaft itself will be 28". The insert and nock will add some length, resulting in ~29" arrow overall.

When inputing your specs it is essential that you enter your DRAW LENGTH as requested - NOT your desired arrow length. They are not the same, and you will end up with poor flight unless you enter inputs as prompted.